A QR code with a logo draws far more attention than a black and white square and says at a glance whose it is. But a logo covers part of the code. The trick is to let the code make up for that loss by itself.
Error correction: your logo's safety net
QR codes are designed to recover their information even when part of the pattern cannot be read. This is called error correction, and it has four levels: L (about 7%), M (15%), Q (25%) and H (30%). The higher the level, the more damage the code tolerates, though the pattern gets a little denser.
A logo means deliberately covering part of the code. That is why codes with a logo use level H.
How big can the logo be?
- Put the logo in the middle of the code, no wider than about a fifth of the code's side.
- Never touch the three large squares in the corners (the position markers); the phone finds the code with them.
- Leave a thin gap around the logo so it does not touch the modules directly.
- Logos with thin lettering do not read when small; a simple emblem or an initial works better.
Keep the contrast
The logo can be colourful, but the code itself should stay dark on a light background. If you want to bring your logo's colour into the code, pick a dark brand colour; light yellow or pastel shades make it hard for the camera to tell the pattern apart. We go into colour choice in QR code colours.
File and print
Send a code with a logo to the printer as SVG or PDF; it stays sharp when enlarged. PNG is enough for the web and social media. You can see which format suits where on the download formats page.
Adding a logo in oqur
When you add a logo, the generator raises error correction to the highest level by itself and warns you before downloading if the contrast is low. Save your logo and colours as a template and apply them to your codes in one click.
Before printing, scan the code with different phones, at its real size and in real light. If even one phone struggles, make the logo a little smaller. For a step-by-step check, see the guide to testing before printing.