For years packaging has carried two separate codes: the striped barcode scanned at the till and a QR code that informs the shopper. A GS1 2D barcode joins the two in one code: the till reads the number, the phone opens the product page.
What is GS1 Digital Link?
It looks like an ordinary QR code. The difference is that the web address inside it is written by the GS1 rules: the product number and other data sit in defined places in the address. A sample address looks like this:
https://id.yourbrand.com/01/08690000000012
The 01 here says that the number after it is the product's GTIN. A phone opens the address and shows the product page; a till with a 2D scanner decodes the GTIN from the same code and adds the product to the sale.
What can be written into the code?
| Data | Identifier | Example |
|---|---|---|
| Product number (GTIN) | 01 | 08690000000012 |
| Batch or lot | 10 | L2410A |
| Expiry date | 17 | 271231 (31 December 2027) |
| Serial number | 21 | A separate number for each item |
With the batch and the expiry date in the code, stock tracking and recalls get easier: the till can catch an expired product at the point of sale.
Where do you get your GTIN?
GTINs are issued by GS1; you get your company prefix by becoming a member of your country's GS1 organisation. The 8, 12, 13 or 14-digit number on your product is written into the code padded to 14 digits. Do not make up a barcode number yourself; it may clash with another product at tills and in chain stores.
Should the striped barcode go at once?
No. GS1 aims for retail tills to be able to read 2D codes by the end of 2027, but that will not happen in every shop at the same time. Keep the striped barcode on the packaging until the scanners where your product is sold can read the 2D code. Plan the switch with the chains you work with; printing both codes side by side is the safest way during this period.
What should the product page have?
- Ingredients, allergens and nutrition values
- Usage information and certificates
- A recipe, a user manual or a set-up video
- Recycling instructions
- A recall notice if needed
You can offer several links from the same code. For what else works on packaging, see the packaging use cases.
2D barcodes in oqur
The 2D barcode (GS1) type writes your GTIN and, if you like, the batch, expiry date and serial number into the code by the GS1 Digital Link rules, and opens the product page when scanned with a phone. oqur does not issue numbers; it places yours in the code. To show product information on a rich page, see the product type too. Both types come with the Pro plan and above.